Tandem press brakes
.SUPERIOR TANDEM
Single or synchronized mode
how and when you want
Offline programming
reduces errors and waste
Does not require foundations
the most versatile solution
How a tandem press brake works
A tandem press brake is the coupling of two machines into a single one. There are also solutions that combine three press brakes (tridem) or four (quadrem). The machines can have the same length and the same nominal bending power, or different lengths and nominal bending powers.
You can work in two modes, how and when you want. In single mode, each machine is independent, with its own photocells and a central mechanical protection guard. In synchronized mode, the machines are programmed by the numerical control of the master machine, which sends signals to the slave machine, so one CNC controls both.
Programming can be done remotely or on board, and offline programming reduces errors and waste. A tandem does not require foundations, which makes it the most versatile solution for long parts.
Tandem, tridem or quadrem: configurations and sizes
| Configuration | Machines | Published example | Force and length |
|---|---|---|---|
| Tandem | 2 | 2 × 4 m, 250 t each | 500 t of total force only when the profile uses the entire length; for a profile shorter than 4 m, the total power is 250 t |
A tandem is a good alternative to one large press brake for long profiles and long sheets that need high power. Both machines can also work separately, and they must be perfectly calibrated, because a problem on one affects both.
Read How to choose a tandem press brake: the definitive guide to compare it with a single large machine.

MAIN FEATURES
When we talk about tandem press brakes we are referring to a particular configuration that involves the coupling of two machines into a single one, but there are also solutions that combine three press brakes(tridem) or 4 press brakes(quadrem).
In this type of configuration the machines can have the same length and the same nominal bending power or different lengths and nominal bending powers can be foreseen.
Each machine is independent, equipped with its own photocells and central mechanical protection guard.
Increased throat
Increased stroke
Increased opening
Intermediate height
Clamps for every type of tool
Side controlled bending support

Tandem press brake FAQ
|
A tandem press brake couples two machines into a single one, controlled by one CNC and programmable remotely or on board. VICLA also offers solutions with three (tridem) or four (quadrem) press brakes. |
|
Yes. VICLA lets you choose single or synchronized mode, how and when you want. In single mode each machine is independent, with its own photocells and a central mechanical protection guard. In synchronized mode the master machine's CNC controls both. |
|
No. VICLA states that the .SUPERIOR TANDEM does not require foundations, and its guide adds that tandem machines generally do not need a pit for the lower bench housing. |
|
Most work that needs a tandem concerns long profiles and long sheets that require high power, in sectors such as industrial bodywork, trailers, agricultural equipment, aircraft parts, modular spaces and storage solutions. |
CONTACT US.
Our experts will provide you with all the information you need about our products and services.
Fill out the form.
A DIRECT CONTACT
The first step is at our place.
TRUST IN THE FIRST PLACE
Before and after the sale.
ANYTIME YOU NEED IT
to solve any kind of problems.